8 low noise isolated 500mA outputs
International 12V 2A wall power supply included
Optionally power from USB charger or battery when used with Mission 529M
LED status indications for input and all 8 outputs
Over current and short circuit protection
Power high current devices up to 1000mA with supplied parallel cable
Inputs: 12VDC (AC adapter included)
Outputs: 8 x 500mA, or 4 x 100mA + 1 x 1000mA parallel
Maximum Output Power: 16.8W
529X power supply
12V international AC/DC wall unit
1 x 4 way parallel cable
9 x 2.1mm 9V DC cables
18V voltage doubler cable
The Mission 529 is one of the lowest noise pedal board power supplies available. Check out the test results to see noise measurements of the 529 compared to some other isolated pedal board power supplies.
The traces above show a 9VDC power output from the Mission 529 compared to another brand of isolated power supply using an external AC/DC switching supply. For reference there is also a trace from a large, premium power supply with an internal toroidal transformer. Toroidal transformers are sometimes quoted in systems specs as being important for low noise.
As you can see from the traces, the 9VDC from the 529 and toroidal supply are virtually identical, whereas the other switching supply is somewhat noisier.
The second set of traces above shows what can happen when switching noise passes into the audio path. In this test, two power supplies are powering a compressor pedal. A test signal representing the guitar is generated at the input and measured at the output.
You can see in the first trace of another brand of power supply that there is some noise superimposed on the audio signal. In the second trace, where the 529 is powering the effect pedal, this noise is removed.